Perfluorinated polyether grease or PFPE grease
This product is made of polytetrafluoroethylene (PTFE) thickened with highly chemically stable perfluoropolyether oil (PFPE) and added with special anti-corrosion additives. It is refined by special process.
Extremely wide working temperature, excellent high temperature stability and oxidation stability;
The consistency changes with the temperature very little, the volatility is very low, the service life is very long;
Excellent abrasion resistance, abrasion resistance, combustion resistance, radiation resistance, corrosion resistance;
Low friction coefficient, high bearing capacity, good compatibility with most rubber, plastic;
Resistant to water, oil, vacuum (low steam pressure), most organic solvents and strong acid and alkali.
Suitable for lubrication and sealing of bearings, pumps, valves and sealing rings of semiconductor and liquid crystal, photoelectric process equipment in high vacuum or dust-free environment;
Also suitable for contact with corrosive gas, liquid (such as halogen, liquid oxygen, etc.) of the pump, valve.
It can be used for lubrication of bearing of film stretching stretcher, conveyor belt bearing of heat setting machine, chain bearing of high temperature paint oven, bearing of PTA centrifuge differential, solenoid valve, bearing of high temperature oven motor and bearing of corrugated paper machine.
Can also be used for precision machinery, optical instruments and meters, office equipment, clean room equipment parts of the whole life lubrication;
This product has NLGI1#, 2#, 3# consistency grades.
Containers must be cleaned with appropriate solvents to be free of impurities, moisture, oil stains and fibers.
After use, it must be tightly covered in time to avoid mixing with moisture, impurities and other harmful substances that affect the insulation performance of the product;
Should not be stored for too long, and should pay attention to dust and moisture, do not mix with other oils.
Next Product：bentonite grease