Why do lithium-based greases provide excellent lubrication performance even under extremely harsh op

Lithium base grease is the most commonly used grease. The difference between lubricating oil, butter and lithium grease is still very big. Lithium-based lipids are gelatinous. High temperature oil with excellent water resistance, easy to use for mechanical parts in contact with wet water. It is prepared by thickening mineral oil with hydroxy-fatty acid lithium lithium soap and adding various additives (such as antioxidants, rust inhibitors and corrosion inhibitors). Excellent water resistance, mechanical stability, extreme pressure and wear resistance, water and pumping resistance, rust resistance and oxidation stability. Lithium based greases provide excellent lubrication performance even under extremely harsh operating conditions.

Lubricants are usually liquids used for lubrication and cooling. It turns light blue before wearing and black when wearing. Lubricants are used in various types of cars and machines to reduce friction and protect liquids or semi-solids in machines and mechanical parts. Lubricants, mainly lubrication, cooling, rust prevention, cleaning, sealing, cushioning.

Butter is a solid, mainly used for lubrication, water and corrosion protection of metal surfaces. It turns yellow, but it turns black when used! Butter is the generic name for calcium based greases. The generic name comes from the fact that calcium-based oils are yellow and resemble pig sweat, so people seem to vividly refer to them as butter. Today, grease has developed a variety of lubrication products. In addition to calcium-based greases, there are bearing greases and gear greases for different purposes, such as lithium based greases, which also have a variety of colors.

Equipment oil leakage is generally divided into three types: oil seepage, dripping oil and flowing oil.

(1) Oil leakage. For fixed connection parts, dripping oil every 30 minutes can cause oil leakage. For active connections, a drop of oil every 5 minutes is considered a leak.

(2) Drop oil. One drop of oil is equal to one drop of oil every two to three minutes.

(3) Flowing oil. 5 or more drops of liquid oil per minute.

The degree of oil leakage of equipment can be divided into three levels: severe oil leakage, oil leakage and minor oil leakage.

2. Ways to prevent oil leakage

10 methods to control oil leakage: frequent, find, change, change, winding, back, matching, leading, pad, welding equipment leakage cross method.

(1) Hard work: hard research, hard problems, and hard governance.

(2) Discovery: Carefully find the location and cause of the oil leak.

(3) Changes: unreasonable structural and equipment changes.

(4) Replacement: Timely replacement of defective seals and other lubricating parts.

(5) Wrap: Wrap the sealing tape, sealing line, etc. around the pipe joint.

(6) Oil return: enlarge or expand the oil return hole to dredge the oil return and prevent overflow.

(7) Matching: correctly select and match the joint surface of the sealing ring and the groove.

(8) Wire: Add wire pipe, cut oil groove, oil baffle and so on at the overflow and leakage.

(9) Pad: Add special paper pad or sealant to the joint surface.

(10) Welding: repair leaking oil holes and oil hole welding.

Good sealing performance also plays a positive role in preventing and reducing oil spills.